layout: default has_children: false parent: Device

Connect Hardware

What accessories you need for the setup?

• IoT Gateway
• Antenna with 2 labeled LTE cables and GNSS cable
• Power cable (12V vehicle adapter)
• Ethernet cable
• Measurement-PC

Make sure you have access to the desired vehicle or a 12V power supply.

1. Connect the cable labeled with GNSS to the GPS connector and the two LTE cables to the corresponding LTE1 and LTE2 connector.

2. Plug the power supply into a 12V power source and connect it to the IoT gateway. The green LED indicator at the back of the device shows that the power is turned on.

3. Plug the Ethernet cable in the Ethernet "Eth" port next to the 12V power port and connect the other end to the Measurement-PC.

4. After power connection the gateway checks for Software update, if needed it will install automatically. This process can anywhere between 7-15 minutes.

Continue with the Hardware Setup